Print Deploy release history

In this section:

ClosedEarlier versions (1.5.xxxx)
ClosedEven earlier versions (1.0.743 to 1.4.1435)

1.5.1923 (Nov 9 2021)

Cloner: v555
Client: Windows v1354, macOS v1064, Linux v372
Direct Print Monitor: 106.4.0

Fixes

  • The Direct Print Monitor has been downgraded to version 106.4.0 to prevent issues with old version of the PaperCut NG and PaperCut MF application server. [PD-1212]

1.5.1919 (Nov 8 2021)

Cloner: v555
Client: Windows v1353, macOS v1063, Linux v367
Direct Print Monitor: 107.1.0

Enhancements

  • The Print Deploy Cloner will now prioritise command line arguments, such as port number, hostname, API key, over parameters in its filename. [PD-1138]

  • The Print Deploy Client now shows the client version number on both the login screen and printer list screen. [PD-1166]

  • Added a case insensitive Zone Filter Hostname example regex to the Help Center FAQ. [PD-951]

Fixes

  • Fixed an issue in the Print Deploy Client where navigating the printers list would not work and show "An error has occurred in the script on this page". [PD-1189]

  • Fixed an issue where cloning print queues on a reference machine again would reinstall print queues that were already installed on a client machine, even though settings or defaults had not changed. [PD-1163]

  • Customers who exceed their licensed user count or embedded device count will now no longer be prevented from administering Print Deploy during the license grace period. [PD-1135]

  • Fixed an issue where printer installation takes a long time when there are a large number of optional Mobility queues. [PD-1159]

  • Fixed an issue in the Print Deploy Cloner on Windows where defaults and capabilities are not correctly captured when a print queue is hosted on Linux + Samba print servers. [PD-1153]

  • Fixed an issue where Google authentication would fail sometimes for some users. [PD-1165]

  • Fixed an issue where PaperCut Mobility Print queues starting with @ in their name failed to install on Windows Print Deploy clients. [PD-1155]

  • Fixed an issue in the Print Deploy Server where large amounts of RAM were used caused by the Print Deploy Client being used by users who did not exist in the PaperCut NG/MF Application Server. [PD-1209]

  • Fixed an issue on macOS where the Print Deploy Cloner would not copy all relevant driver files for some KYOCERA TASKALFA KPDL macOS printer drivers. [PD-1152]

  • Fixed an issue where a macOS CUPS printer driver was not installed correctly on clients due to a CUPS filter using relative locations in a PPD. [PD-1202]

  • Improved error and problem logging around "otool" on macOS when Cloning. [PD-1195]

Miscellaneous

  • The Print Deploy Cloner will now validate its API token prior to starting the cloning process, allowing administrators to verify the token earlier if there are problems. [PD-196]

    The new Print Deploy Cloner is not supported by older Print Deploy Servers. Please ensure you use the Print Deploy Cloner from the targeted Print Deploy Server.

  • The Print Deploy Cloner now logs the size of the uploaded bundle in the log file saved to disk. [PD-1116]

1.5.1876 (Sep 21 2021)

Cloner: v534
Client: Windows v1328, macOS v1042, Linux v346

Fixes

  • Fixed an issue where the PaperCut Print Deploy Client was not correctly sending authentication credentials to PaperCut Mobility Print servers. [PD-1133]

1.5.1852 (Aug 26 2021)

Cloner: v534
Client: Windows v1318, macOS v997, Linux v302

Enhancements

  • Enhanced the Print Deploy Cloner to better support macOS printer drivers that use non-standard file locations. [PD-515] [PD-595]

  • Fixed an issue that caused some macOS print queues to fail to operate because of specific driver dependencies being installed in the wrong directories. A new config key named UseStandardDriverPath has been added. This is set to true by default to allow the macOS client to install the drivers onto the standard paths. [PD-729]

  • Enhanced the Print Deploy Cloner to indicate when it detects, and uses, a proxy when uploading bundles to the Print Deploy Server. [PD-1092]

  • Improve compression used by the Print Deploy Cloner when transferring files to the Print Deploy Server, reducing time taken to clone. [PD-1122]

  • Enhanced the Print Deploy Client to ship with .exe versions of some .bat files, better supporting environments that block the use of cmd.exe [PD-1054]

  • Fixed various performance issues in the Print Deploy Client that could lead to excess Print Deploy Server and/or PaperCut Mobility Print server resource consumption. [PD-1037] [PD-1102] [PD-1099]

Fixes

  • Fixed an issue where the PaperCut Print Deploy Cloner was not correctly capturing capabilities and defaults of PaperCut Mobility Print queues. [PD-1068]

  • Improved support in the Print Deploy Client and Print Deploy Cloner for proxies and non standard port configurations. [PD-1070] [PD-1073]

  • Fixed an issue on the Print Deploy Client popup where the installation status of a PaperCut Mobility Print printer would not update after logging in to the PaperCut Mobility Print login popup. [PD-1118]

Miscellaneous

  • Updated system requirements when cloning on macOS that "otool" from the command line developer tools is required. [PD-1096]

1.5.1805 (Jul 8 2021)

Cloner: v493
Client: Windows v1275, macOS v997, Linux v302

Enhancements

  • The Windows Print Deploy Client can now be configured to use PowerShell to install Windows Server queues. This can be used where server queue installation fails with a "Windows Printer Installation" progress bar and error message. [PD-1038]

Fixes

  • Improved the reliability of the Print Deploy Client in some environments where the client would log "net/http: timeout awaiting response headers" errors. [PD-1028]

  • Fixed an issue where IPP/IPPS queues were incorrectly included when attempting to Clone print queues resulting in a failure generate a Cloner bundle. [PD-1029]

  • Fixed an issue where installation would take a long time, especially when there were a large number of print queues to install. [PD-1031]

  • Fixed an issue where large Print Deploy Cloner bundles would not upload correctly with an error: "timeout awaiting response headers". [PD-1035]

Miscellaneous

  • Updated PaperCut Direct Print Monitor to version 106.4.0.

1.5.1754 (Jun 1 2021)

Cloner: v487
Client: Windows v1235, macOS v955, Linux v273

Fixes

  • The Print Deploy Client Windows Installation wizard now no longer displays command prompts during installation. [PD-819]

  • Added translations to the Print Deploy Client system tray menu options. [PD-1005]

  • Resolved an issue where a large number of optional PaperCut Mobility Queues deployed to a client would cause a "rate limit" warning on the PaperCut NG/MF Application Server. [PD-1022]

  • Fixed an issue where re-cloning an existing print queue with no changes would cause a re-deployment of the print queue. [PD-948]

Miscellaneous

  • Updated system requirements: Windows 7 is no longer officially supported as it is an End-Of-Life product. [PD-1026]

  • Updated PaperCut Direct Print Monitor to version 106.1.0.

1.5.1724 (Apr 22 2021)

Cloner: v477
Client: Windows v1187, macOS v923, Linux v246

Enhancements

  • Added support for cloning HTTP(S)/IPP(S) server based print queues on Windows. Direct HTTP(S)/IPP(S) printers are not supported. [PD-913]

Fixes

  • Fixed an issue where PaperCut Mobility Print queues would fail to install when Print Deploy authentication was set to TRUST or AUTO. [PD-1000]

  • Fixed an issue in the Print Deploy Client where large numbers of print queues would not display all printers. [PD-999]

  • Updated the code signing certificate used for Print Deploy. [PD-994]

  • Fixed an issue where language translations were not being applied on client machines. [PD-965]

1.5.1694 (Mar 15 2021)

Cloner: v425
Client: Windows v1158, macOS v895, Linux v207

Fixes

  • Fixed an issue where "optional" Mobility Print queues failed to install on client machines. [PD-988]

1.5.1687 (Mar 15 2021)

Cloner: v425
Client: Windows v1154, macOS v891, Linux v202

Enhancements

  • Added support for DEB and RPM-based Linux distributions. Includes a new Print Deploy Client, Print Deploy Cloner, and support for PaperCut Mobility Print queues. [PD-874]

  • Enhanced the PaperCut Mobility Import feature to support installations a large number of PaperCut Mobility Print servers. [PD-961]

  • Added the option to disable Automatic Updates of the Print Deploy Server service (see the About button at the top-right corner of the Print Deploy page). If updates are turned off, security updates and new features no longer automatically appear. [PD-828]

Fixes

  • Fixed a rare issue where the Print Deploy Server service consumed large amounts of RAM. [PD-953]

  • Changed the PaperCut Print Deploy Client to listen on TCP 9177 for PaperCut Mobility print jobs. [PD-761]

  • Fixed a rare issue on macOS clients where print queues with different driver settings but the same printer driver did not apply settings properly. [PD-921]

  • Fixed an issue where deleting the last imported PaperCut Mobility Print queue would delete required drivers from the Print Deploy Server. [PD-963]

  • Fixed an issue where Group based filters on Zones did not correctly apply to users who logged in with "Sign in with Google". [PD-985]

1.5.1598 (Jan 11 2021)

Cloner: v419
Client: Windows v1124, macOS v862

Enhancements

  • Added the ability to toggle Advanced Printing Features (EMF Spooling) on Windows clients. [PD-873]

  • Added support for Auth Methods to the Settings tab. [PD-892]

  • Added support for Sign in with Google for Chromebook and Chrome browser Print Deploy clients. [PD-604]

  • Added dynamic display of printers in the Print Deploy client, improving performance for larger printer lists. [PD-950]

Fixes

  • Fixed an issue that caused the LPR Byte Count tickbox on Windows LPR print queues to not be deployed correctly. [PD-927]

  • Fixed an issue that caused the side panel in the Print Deploy Admin interface to disappear due to some browser window sizes. [PD-872]

1.5.1531 (Nov 16 2020)

Cloner: v392
Client: Windows v1091, macOS v832

Enhancements

  • Added the ability for users to stop the Print Deploy client login window from repeatedly popping up before they sign in. [PD-834]

  • Removed the 255-character limitation on the Hostname regex Zone filter.

Fixes

  • Fixed an issue that caused the client to not start if it was deployed using Jamf or Intune without a defined server_port. [PD-887] [PD-904]

  • Fixed an issue that caused Windows Mobility Print queues to not install if they were auto-imported from a Linux app server. [PD-882]

1.5.1513 (Oct 27 2020)

Cloner: v332
Client: Windows v1081, macOS v822

Enhancements

  • Added the ability for SysAdmins to provide users the option to "Continue with Google" when logging in on the Windows and macOS client. See Set the method that Print Deploy uses to determine the user’s identity. [PD-793]

  • Added support for load balancers, proxies, SSL termination services, etc. by giving SysAdmins the ability to configure accessible ports for clients to connect to. See AccessiblePrintDeployTLSPort and AccessibleMobilityPrintTLSPort in Configure the client . [PD-804]

Fixes

  • Fixed an issue on the Linux server that caused importing Mobility Print queues to fail and only a generic message on the Print Deploy admin interface. [PD-857]

  • Fixed an issue on the macOS cloner that caused Mobility Print queues using native drivers to be cloned as server queues. [PD-852]

  • Fixed a rare issue on macOS that caused the client window (if open) to continuously show an uninstalling message after a user had manually deleted a print queue followed by the SysAdmin also removing it from the Zone [PD-878]

1.4.1435 (Sep 17 2020)

Cloner: v329
Client: Windows v1031, macOS v772

Fixes

  • Improved compatibility with limitations in Windows Print Spooler TCP/IP port name requirements. [PD-835]

1.4.1432 (Sep 7 2020)

Cloner: v329
Client: Windows 1028, macOS v769

Enhancements

  • Added the ability for SysAdmins to use hostname filters using regex when configuring zones. [PD-744]

Fixes

  • Fixed an issue with some printers failing to install on macOS computers due to PPD files not using Unix-style line breaks. [PD-825]

1.4.1416 (Aug 20 2020)

Cloner: v329
Client: Windows v1027, macOS v768

Enhancements

  • Added more input validation for the polling config in the Settings tab to better handle decimals, E notations, and floor/ceiling values. [PD-811]

  • Added the ability for SysAdmins to reorder the priority of zones using drag and drop. [PD-814]

Fixes

  • Fixed an issue that caused the installation of imported Mobility Print queues to fail on Windows machines with the error "Failed to install. Possibilities are invalid driver certificate or wrong architecture." Printers will need to be re-imported to resolve this issue fully. [PD-820]

  • Fixed an issue that, after a user change within the same OS session, didn't change tracking of print jobs sent to a Mobility Print queue against the new user. [PD-767]

  • Fixed an issue where server queues that took longer than one minute to install showed as "failed" instead of "installed" in the Print Deploy client window. [PD-772]

  • Fixed an issue on some macOS computers where, after a fresh installation of the client, the deployment service only started after the computer was restarted. [PD-809]

  • Fixed an issue where the Windows Print Deploy client failed to install a printer if the port details were changed and redeployed with the same name. [PD-786]

  • Fixed an issue on the admin UI where newly imported Mobility Print queues are displayed only after a manual refresh. [PD-802]

1.4.1389 (Aug 6 2020)

Cloner: v329
Client: Windows v1019, macOS v760

Enhancements

  • A new UI for viewing zones that lets you prioritize zones in the list to set the default printer. The client’s default printer is the printer that’s set as the default in the highest priority zone. [PD-663]

  • A new Settings tab that allows the SysAdmin to change some of the config values without the need to manually modify them via the client.conf.toml file on the server and restarting the server. [PD-692]

Fixes

  • Fixed a rare issue that caused the default printer to not be set correctly on the end users’ computers when the same printer was connected to two zones with different zone orders. [PD-766]

  • Improved the performance of the Print Deploy cloner to better handle large print driver bundle sizes through chunked uploads. [PD-758]

  • Fixed an issue that was causing users on Windows 8.1 devices with KB4489881 using the Print Deploy client to see an error similar to 'Intl is not available'. [PD-784]

  • Fixed an issue that caused the client to not honor the default printer set by the SysAdmin when the user manually changes the default print queue. [PD-297]

Miscellaneous

  • SelfServiceEnabled and BrandingServerPort are no longer configurable. Self Service will always be enabled and the branding server port is now redundant

1.3.1318 (Jul 8 2020)

Cloner: v312
Client: Windows v986, macOS v730

Fixes

  • Fixed an issue that causes the installation of Mobility Print queues to fail on macOS clients if they were imported via the wizard (not cloned) with special characters in the printer name. [PD-764]

1.3.1314 (Jul 2 2020)

Cloner: v312
Client: Windows v986, macOS v730

Enhancements

  • Added the ability for Mobility Print queues to be automatically imported and displayed in the Print Deploy admin UI. [PD-682]

  • Improved the performance and reliability of Print Deploy when retrieving and processing print queues on the server. [PD-751]

1.3.1267 (Jun 4 2020)

Cloner: v312
Client: Windows v986, macOS v730

Fixes

  • Fixed an issue on Windows clients where server based print queues were observed to rename randomly. This was introduced in v1.3.1257 where a new Windows API was used. This update reverts the changes in PD-690. [PD-732]

1.3.1258 (May 28 2020)

Cloner: v312
Client: Windows v981, macOS v726

Fixes

  • Fixed an issue in the client that caused login popups to appear on users' computers if the value set for UserIdentityMethod on the server contains lowercase characters. [PD-722]

1.3.1257 (May 26 2020)

Cloner: v312
Client: Windows v980, macOS v725

Enhancements

  • Updated the behavior of the client so that the "Windows Printer Installation" pop up no longer appears when a server printer is being installed in the background. [PD-690]

  • Updated logs in the client to reduce noise from failed network requests and to include more information about the identity of the logged-in user. [PD-704, PD-705]

Fixes

  • Fixed an issue in the client that caused several non-functioning items to show up on the task tray menu when the Print Deploy server is unreachable. [PD-703]

  • Fixed an issue in the client that caused authentication for Mobility Print queues to fail on usernames that are different from the logged-in user. [PD-702, PD-710]

1.3.1244 (11 May 2020)

Cloner: v312
Client: Windows v970, macOS v715

Enhancements

  • Print Deploy now allows SysAdmins to nominate print queues to be optional for users to install on their computers. Users can then select which printers they want to install. This feature also includes a new Print Deploy client UI and a customizable help link for users. [PD-428]

  • Added the ability to set a default print queue for a zone. See the Configure the client page of the Help Center for more info. [PD-472]

  • Added the ability to disable user notifications with the new configuration key 'UserNotificationsEnabled'. [PD-633]

  • Added the ability to set the 'accessible IP or hostname' of the Print Deploy server with the new configuration key 'AccessibleHost'. [PD-333]

  • Restructured Print Deploy Help Center content headings.

Fixes

  • Fixed an issue that was causing the Print Deploy client to reinstall server printers that have already been installed. [PD-689]

1.2.1194 (Apr 20 2020)

Cloner: v312
Client: Windows v950, macOS v695

Fixes

  • Fixed an issue that caused users to be unable to print on queues installed by the client on macOS because of missing driver files. [PD-657]

Miscellaneous

  • Print Deploy Help Center - various updates.

1.2.1176 (Apr 6 2020)

Cloner: v312
Client: Windows v939, macOS v684

Enhancements

  • Added Restart.command to the macOS Print Deploy Client to allow easy restarting of the client. [PD-602]

  • Added the ability for SysAdmins to specify an organization-wide TEMP directory for the Print Deploy client, to use in environments where %TEMP% is locked down. This is set via a new config key, CustomTempDirectory. [PD-606]

Fixes

  • Fixed an issue with the macOS Print Deploy Cloner that was not honouring the 'Share this printer on the network' flag for the printer and caused the printer to be shared on the network when installed on a client computer. [PD-491]

  • Fixed an issue that prevented PaperCut Mobility Print queues with spaces in the printer name from being installed on macOS computers. [PD-591]

  • Fixed an issue that sometimes caused printers to be continuously installed. [PD-623]

1.2.1114 (Mar 13 2020)

Cloner: v307
Client: Windows v862, macOS v619

Fixes

  • Fixed an issue that caused macOS clients installed via Jamf with a .plist file to fail due to a missing client.conf.toml file. [PD-605]

1.2.1105 (Mar 10 2020)

Cloner: v307
Client: Windows v862, macOS v613

Fixes

  • Fixed an issue that caused printing on direct queues to not be tracked properly on some macOS Catalina clients after Print Deploy Client ugrades. [PD-597]

1.2.1086 (Mar 02 2020)

Cloner: v307
Client: Windows v847, macOS v592

Fixes

  • Fixed an issue that caused printing on direct queues to not be tracked properly on some macOS machines. [PD-590]

1.2.1083 (Mar 02 2020)

Cloner: v307
Client: Windows v847, macOS v592

Fixes

  • Fixed an issue that occasionally caused upgrades on macOS clients to fail. [PD-577]

  • Fixed an issue that caused printers to be reinstalled every cycle on some clients [PD-589]

1.2.1077 (Feb 27 2020)

Cloner: v307
Client: Windows v847, macOS v592

Enhancements

  • Added configurable key 'StrictSSLCheckingEnabled' to force the Print Deploy clients to verify the SSL certificate of the Print Deploy server before connecting. This feature is disabled by default. [PD-575]

  • Added support for ECDSA certificates, a faster and more secure option than RSA for encrypting connections to the Print Deploy server. [PD-576]

  • The Print Deploy server now automatically creates a backup of all the cloned printers, drivers, and configurations each week. A maximum of six backups are stored on the disk. [PD-169]

  • Updated the organization name of the Print Deploy server's default self-signed certificate. [PD-584]

Fixes

  • Fixed an issue that caused macOS clients to occasionally fail during startup. [PD-588]

1.2.1045 (Feb 17 2020)

Cloner: v302
Client: Windows v826, macOS v572

Enhancements

  • Print Deploy now supports Windows computers that are shared between users. Print jobs are tracked against the user who logs into, or fast user switches, on the computer. Note: Mobility print queues that were deployed prior to this release will need to be redeployed. [PD-296]

  • Auto-updates now automatically remove old versions of Print Deploy on Linux and Mac computers. [PD-423]

1.1.1019 (Feb 5 2020)

Cloner: v302
Client: Windows v807, macOS v545

Enhancements

  • Improved the speed of driver deployment when installing printers that share the same driver [PD-558]

  • Auto-updates now automatically remove old versions of Print Deploy on Windows computers [PD-423]

1.1.1008 (Jan 23 2020)

Cloner: v302
Client: Windows v802, macOS v540

Enhancements

  • 'ImageFlow' virtual printers, including variants, are no longer monitored by Print Deploy clients. [PD-565]

1.1.1002 (Jan 21 2020)

Cloner: v302
Client: Windows v801, macOS v539

Enhancements

  • Added an option in the Print Deploy client (Windows and macOS) to sign in as a different user. [PD-469]

  • Enhanced Print Deploy’s security to use TLS1.2 as the default cryptographic protocol. Both the cipher suites and cryptographic protocol are configurable. [PD-506, PD-529]

1.1.956 (Dec 30 2019)

Cloner: v302
Client: Windows v778, macOS v516

Enhancement

  • Logging improvements when upgrading the Print Deploy client running on Windows. [PD-544]

  • Logging improvements to include the datetime stamp in the pc-printer-ui-controller.log file. [PD-142]

  • Added the option for a SysAdmin to delete a print queue's printer driver profile. [PD-556]

Fixes

  • Fixed an issue in Print Deploy where not all of the designated print queues are installed on the computers of users whose usernames have a dot symbol (this requires 19.2 maintenance release). [PC-16961]

1.1.904 (Nov 26 2019)

Cloner: v302
Client: Windows v724, macOS v468
Enhancement

  • Added the option during Print Deploy client installation (Windows and macOS) to exclude job tracking on direct queues. [PD-490]

Fixes

  • Fixed a rare issue that caused the Print Deploy page in the PaperCut NG/MF Admin web interface to show a HTTP 500 Timeout Error under some network conditions. (This requires 19.2 GA or later.) [PD-493]

  • Fixed an issue that caused the cloner tool to fail to upload print queues to the Print Deploy server if the hostname of the server contained a newline (carriage return) character. [PD-514]

  • Fixed an issue in the Print Deploy client that caused some jobs sent via Mobility Print queues to not print correctly. [PD-422]

1.1.881 (Nov 6 2019)

Windows: Cloner v168, Client v710
macOS: Cloner v134, Client v451
Enhancement

  • Chromebooks can now connect to the Print Deploy server if the server doesn't have a configured SSL certificate. [PD-479]

Fix

  • Fixed a rare issue where zones could not be edited with some licenses. [PD-484]

1.1.866 (Oct 22 2019)

Windows: Cloner v164, Client v710
macOS: Cloner v134, Client v451
Enhancements

  • Added print queue search functionality. You can now search print queues based on print queue information and the OS. [PD-446]

  • Added Chromebook support for Print Deploy. You can now connect Mobility Print queues to zones and deploy the print queues to managed Chromebooks. Chromebooks must be running ChromeOS version 42 or higher and have the PaperCut Mobility Print app installed. [PD-315]

  • Added the ability to deploy print queues based on user memberships in groups. Queues connected to a zone are deployed to computers that belong to the specified IP range and users who belong to the specified user group. This feature requires PaperCut NG/MF 19.2 or later. [PD-328]

Fixes

  • Fixed an issue that caused server print queues shared via SMB to fail to be installed by the Windows Print Deploy client. [PD-337] [PD-371]

  • Fixed an issue where the cloner tool for macOS failed to clone Mobility Print queues if the device URI has special characters (e.g. a space character). [PD-451]

1.0.814 (Oct 1 2019)

Windows: Cloner v164, Client v707
macOS: Cloner v129, Client v449

  • Notarized Print Deploy client and cloner in preparation for macOS Catalina coming out of beta. [PD-340] [PD-341]

    macOS Catalina beta users will not receive the following error message: "PaperCut Print Deploy Client.pkg" can't be opened because Apple cannot check it for malicious software.

  • Added translation support for the following locales: Italian (it), Basque (eu), Dutch (nl) [PD-432]

  • Added new translation keys for text requiring translation. [PD-377]

  • Fixed UI that was broken when rendering for non-English languages. [PD-377]

1.0.801 (Sep 24 2019)

Windows: Cloner v157, Client v706
macOS: Cloner v112, Client v447

  • Fixed an issue in the Print Deploy Client that resulted in missing text when using some locales. [PD-433]

1.0.799 (Sep 23 2019)

Windows: Cloner v157, Client v705
macOS: Cloner v112, Client v446

  • Added translation support for the following locales: Chinese (zh-HK), French (fr), German (de), Hungarian (hu), Polish (pl), Portuguese (pt-PT), Russian (ru), Spanish (es-ES), and Turkish (tr) [PD-432]

1.0.793 (Sep 18 2019)

Windows: Cloner v157, Client v705
macOS: Cloner v112, Client v446

  • Print Deploy MacOS cloner tool: Fixed an issue that caused cloning to fail with some non-English system locales. [PD-348]

  • Fixed an issue that caused the cloner tool to upload printer queues without all of their required information. [PD-343]

  • Fixed an issue that sometimes caused the user to have to press the Enter key twice to start the Windows cloner. [PD-387]

1.0.783 (Sep 11 2019)

Windows: Cloner v152, Client v704
macOS: Cloner v107, Client v445
Enhancement

Added the ability to delete print queues from the Print queue list. [PD-332]

Fix

Fixed an issue where the UserIdentityMethod config value was case sensitive, and required uppercase to work. It is now case insensitive. [PD-327]

1.0.743 (Sep 03 2019)

Windows: Cloner v152, Client v704
macOS: Cloner v107, Client v445
Enhancements

  • Added Print Deploy demo mode functionality—go to demo.papercut.com [PD-219]

  • Downloading the Print Deploy client now uses the Application Server external-facing IP address in the downloaded file name. [PD-302]

  • Improved support on IE 11 browsers. [PD-176]

Fixes

  • Fixed an issue that caused the Printer Information popup in the Admin UI to not disappear after removing a print queue from a zone. [PD-300]

  • Fixed an issue so that print queues are now listed alphabetically. [PD-319]

  • Fixed an issue so that the zone list is now sorted alphabetically. [PD-320]

  • Fixed an issue where the cloner tool cloned remote network queues in Windows (HTTP/IPP) that cannot be installed or monitored in client machines [PD-338]

    Fixed an issue that caused cloned remote network queues in Windows (HTTP/IPP) to not be installed or monitored in client machines. [PD-338]

  • Fixed an issue that caused the Windows cloner tool to fail to clone printers when it was run by a non admin user. [PD-310]

  • Fixed an issue that caused the Advanced Print Enablement pack license to not allow adding new zones. [PD-363]

  • Fixed an issue that occasionally caused users to not be prompted for credentials when there was a Mobility Print queue to install. [PD-365]

  • Fixed an issue in the cloner tool that caused print queues on a Linux server shared to a Windows computer via SMB to fail to install on users' computers.